T Slot Nz

• T Slot Nut M36
• T Slot Nz Golf

SSP4828BT-Slot 4.8028.00 200 SSP69 black only SSP6911BT-Slot 6.9011.00 400 SSP6913BT-Slot 6.9013.00 300 SSP6916BT-Slot 6.9016.00 300 SSP6920BT-Slot 6.9020.00 200 SSP6928BT-Slot 6.9028.00 200.Colour Black codes above; take B off the end for Grey PR Skirting Seal PS Skirting Seal T-slot 48 & 69 Skirting Seal PS Tolerance 1. TSLOTS has one of the largest selections to t-slotted profiles. We are always looking to expand our offering to provide you with the exactly you need. Click below to see what we have recently added. Welcome to Kiwislots.nz! We are the most updated casino guide to free slots online in New Zealand. If you are looking for free slot machines or to try new casinos with the latest slot games & no deposit free spins 2020 you came to the right place!

The Nut is a component of a fastening arrangement with a femalethread (on the inside). It normally has some shape or form on theoutside to assist with rotating it so that it will tighten onto amale part and typically come in a right handed thread (tightenedwhen turned in a clockwise direction). Note that some nuts areavailable that are left hand threaded (tightened when turnedanti-clockwise).

• Hexagon Nuts

  Hex Nuts are the most commonly used nut for all types offastenings. They are available in metric coarse thread (standard),metric fine threads, Unified National Coarse (UNC), UnifiedNational Fine (UNF) and British Standard Whitworth (BSW). Metricsizes are made to the DIN 934 standard.
• 
  

• Nyloc Nuts

  Similar and complimentary to the hexagon range, the majordifference being the nylon ring inserted at the end of the nut.This is a self-locking device to stop the nut undoing underconstant vibration or load variations. It is not suitable for usewhere the temperature is liable to exceed 120 degrees Celsius. Foruses where high temperatures are incurred a range of spring metallock nuts are available in 304 grade only. Metric sizes are made tothe DIN 985 standard.
• 
  

• Dome Nuts

  (Acorn or Cap Nuts) come in two styles, one piece or two piece. Aone piece Dome Nut is made from a solid piece of stainless to DIN1587 Standards and the two piece is a hexagon nut with a dome capfused to one end and made with a high polish finish.
• 
  

• Lock Nuts, Half Nuts or Jam Nuts

  These are used under a Hex Nut or another Lock Nut to lock thefastening and stop it from undoing. They are similar to a Hex Nutbut not as high and in metric sizes are made to the DIN 439standard.
• 
  

• Wing Nuts

  The range and grades are similar to the hexagon nuts. These nutsare used in situations where a fastening is often undone and doneup but does not require an over tight fitting. The pressure thatcan be exerted by your fingers is sufficient to hold thefastening.
• 
  

• Hank Bushes

  These are internally threaded but with a round outside and with asmall reduced diameter shoulder. Designed for welding into sheetmetal fabrications so that a fastening can be used to hold firmlyin the sheet product.
• 
  

• Coupling Nuts

  These are very long hexagon nuts that are used to join two longthreads together and are made to DIN 6334 standard.
• 
  

• Flange Nuts

  Used mainly on concrete retaining type fastenings and automotive orsheetmetal fabrications. They are made for sheetmetal punching andare designed so that the 4 prongs and body come through from theback of timber and hold to stop the nut from rotating. They aremainly used in furniture/upholstery work.
• 
  

• Barrel Nuts

  Barrel Nuts have a long internal female thread and one end closedwith a drive. Either Philips, Slot or Socket.
• 
  

• Bumax Nuts

  Bumax Nuts are a range of higher tensile Stainless Steel hexagonnuts.

For Australian customers see StainlessSteel Nuts

Ullrich manufacture a range of tee extrusions . Tee 20mm to 100mm extrusions including split tees and sliding door tees.

Note: Red Indicates – MILL RUN ONLY, Non-Stocked Item. MINIMUM ORDER QUANTITY 200kg. Contact your local branch to enquire.

Search - dies, products and topics...

You can search for die numbers, product names and topics e.g. cladding

NEW ZEALAND

Download PDF

Click on a column heading to sort by that column

Extrusion	DIE No.	Dimensions	Type	Drawing	W	P	Ix	Iy	Mi
UA1216	20.00 x 20.00	Tee	0.166	79.00	2361.00	1065.30	34263.00
UA1217	20.00 x 20.00	Tee	0.299	79.00	4020.82	2030.55	60513.70
UA1543	22.22 x 12.70	Tee	0.272	69.00	1137.76	2918.54	40563.00
UA1987	25.00 x 25.00	Tee	0.209	99.00	4723.11	2079.36	68024.70
UA1218	25.00 x 25.00	Tee	0.380	99.00	8188.88	3943.73	121326.10
UA1967	25.00 x 38.00	Tee	0.200	125.00	11400.07	1555.85	129559.20
UA4224	28.00 x 50.00	Tee	0.809	152.00	76576.10	7549.65	841257.50
UA2830	30.00 x 22.00	Tee	0.270	103.00	4245.21	4496.07	87412.80
UA5278	35.00 x 50.00	Tee	0.692	164.00	64899.11	10842.31	757414.20
UA1544	38.10 x 19.05	Tee	0.238	114.00	2435.53	7306.08	97416.10
UA1219	40.00 x 40.00	Tee	0.623	159.00	35778.80	16052.47	518312.70
UA1545	40.00 x 40.00	Tee	0.917	159.00	50897.04	24238.70	751357.40
UA3071	40.00 x 40.00	Tee	1.198	159.00	64443.19	32580.97	970241.60
UA3003	40.00 x 50.00	Tee	1.389	170.00	120511.09	31777.92	1522890.10
UA1344	44.50 x 25.50	Tee	0.450	137.00	8469.72	17740.33	262100.50
UA4485	45.00 x 100.00	Tee	1.983	285.00	718581.35	61194.07	7797754.20
UA3059	50.00 x 50.00	Tee	0.529	199.00	49013.93	20817.27	698312.00
UA1958	50.00 x 50.00	Tee	0.786	199.00	71442.88	31307.92	1027508.00
UA6260	50.00 x 50.00	Tee	1.054	195.00	92998.28	41840.04	1348383.20
UA1220	50.00 x 50.00	Tee	1.522	199.00	131198.77	63243.64	1944424.10
UA7069	50.00 x 60.00	Tee	1.432	214.00	188304.50	51939.04	2402435.40
UA5277	50.00 x 60.00	Tee	1.421	214.00	166922.46	62768.36	2296908.20
UA3004	50.00 x 75.00	Tee	1.956	240.00	408456.62	61970.70	4704273.20
UA6723	50.00 x 75.00	Tee	2.553	243.00	526152.83	85949.24	6121020.70
UA4517	50.00 x 100.00	Tee	2.332	299.00	905101.99	64058.17	9691601.60
UA6173	50.00 x 130.00	Tee	2.834	354.00	1865149.14	64309.65	19294587.90
UA3005	50.00 x 150.00	Tee	4.175	390.00	3589007.38	87759.79	36767671.70
UA2787	60.00 x 60.00	Tee	1.875	234.00	234130.38	108970.68	3431010.60
UA4998	60.00 x 60.00	Tee	1.846	239.00	233198.91	108902.45	3421013.60
UA6722	60.00 x 60.00	Tee	2.445	233.00	296771.04	145741.76	4425128.00
UA6965	60.00 x 100.00	Tee	2.504	316.00	967822.50	109552.65	10773751.50
UA5238	65.00 x 100.00	Tee	3.409	325.00	1287090.70	186950.23	14740409.30
UA2437	70.00 x 40.00	Tee	1.130	215.00	53215.95	108237.01	1614529.60
UA1714	75.00 x 75.00	Tee	1.772	298.00	362205.38	158642.77	5208481.50
UA5844	80.00 x 139.00	Tee	3.537	432.00	2515953.87	342603.27	28585571.40
UA4234	100.00 x 100.00	Tee	2.508	399.00	923366.21	396987.97	13203541.80

Diagrams actual size unless otherwise indicated. Diagrams are schematic only and are not intended as specification drawings.
OAD = Overall dimensions (mm)
P = External periphery (mm)
R = Radiused corner (mm)
W = Weight (kg/m)
Polar MI units mm⁴
Ix & Iy units mm⁴

Ullrich Aluminium Company Ltd, New Zealand

T Slot Nut M36

Aluminium Castings - Aluminium Extrusions - Aluminium Finishes -Aluminium Ladders, Commercial - Building Products Division -Cladding, UlltraClad® -Decorative Metals -Download Brochures -Extruded Aluminium Bends -Manufactured Al Products -Fasteners -Marine Products -Sheet, Plate & Rollformed Aluminium -Welding Products - UlltraClad® Cladding -

T Slot Nz Golf

Company Profile - Contact Details -Sales Centres - News - Home - TOP